Water & Sanitation Trucks · Kenya water bowser and water-spraying truck range
FAW Jiefang 6.88 m³ 4×2 Municipal Water Bowser
A source-checked municipal water bowser positioned for municipal greening and road spraying. The page separates nominal capacity, chassis data and working-system details, while flagging right-hand drive, legal payload, engineering configuration and Kenya compliance items that still need confirmation before quotation.
Core capabilities in operation
Parameters are translated into practical working results. Any estimate depends on the listed operating conditions and is not a performance guarantee.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| Tank / water system | 6.88 m³ | Source-stated configuration; final build and legal fill volume must be confirmed | Tank material, mounted equipment, axle loads and registration limits affect usable payload. |
| Chassis layout | 4×2 | Source record | Confirm right-hand drive availability and final chassis code for Kenya. |
| Planning coverage example | About 3,440–6,880 m², or roughly 1,150–2,290 m of one 3 m-wide lane | Calculated from nominal source capacity at 1–2 L/m² application rate and 3 m treated width | Illustrative estimate only; actual output changes with nozzle setting, pump pressure, speed, terrain, overlap, wind and legal fill volume. |
Technical specifications
| Manufacturer | CLW (Chengli Special Automobile) |
|---|---|
| Chassis brand | FAW Jiefang |
| Drive layout | 4×2 |
| Fuel type | Diesel |
| Wheelbase | 3900 mm |
| Gross vehicle weight | 11 995 kg |
| Capacity | 6.88 m³ |
Body and tank specifications
| Source Capacity Field | 5001 - 10000L |
|---|---|
| Source Tank Capacity | 6.88 m³ |
| Tank Material | To be confirmed |
| Tank Thickness | To be confirmed |
Additional chassis specifications
| Curb Weight | To be confirmed |
|---|---|
| Drive Layout | 4×2 |
| Emission Options | Euro 2/3/4/5/6 |
| Engine / Motor | Make: WEICHAI / YUNNEI / FAW WP3NQ160E61 (160 HP) D30TCIF1 (170 HP) CA4DD1-16E6 (164 HP) CA4DD2-18E6 (179 HP) CA4DH1-18E6 (179 HP) YN25PLUS160B (155 HP) CA4DT2-18E68 (175 HP) YN25PLUS180 (175 HP) (8 engine options available, 149-179 HP) |
| Fuel / Power | Diesel |
| Gvw | 11995 Kg |
| Overall Dimensions | 7485/8145 × 2350 × 2900 mm |
| Payload | 6.5t |
| Power | 149-179 HP |
| Source Model | CL 22 GP QC |
| Transmission | Manual transmission, with PTO |
| Wheelbase | 3900 mm |
Working system specifications
| Source-Listed Spray Width | ＞16m |
|---|
Operating performance
| Important Note | Performance values are source-stated and require final engineering confirmation for the ordered build. |
|---|---|
| Source Maximum Speed | Not stated |
| Source Spray Width | ＞16m |
Configuration options and trade-offs
- Tank capacity vs legal payload: Nominal tank volume may exceed the legally usable water load after body, equipment and axle limits are applied.
- Chassis and power options: Use the source options as a shortlist only; confirm the exact chassis, engine or motor and transmission for the order.
- Water system: Pump, cannon, spray bar and valve configuration must match the stated duty and water quality.
Operating fit
Suitable conditions
- Municipal greening
- Town road spraying
- Medium-capacity watering routes
Not recommended for
- Severe off-road terrain requiring driven front axles
- Potable-water transport without a compliant tank
- Loads above the final registered payload
Source-checked configuration, with final-build items clearly separated
FAW Jiefang 6.88 m³ 4×2 Municipal Water Bowser is positioned for municipal greening and road spraying. The source record lists 4×2 drive layout, 6.88 m³ capacity information and model CL 22 GP QC.
For a Kenya quotation, confirm right-hand drive availability, legal axle and payload limits, tank material, pump and spray layout, final dimensions and registration requirements. Nominal tank capacity is not a guarantee of the legally usable water load.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Category Match1
- Checked On2026-09-24
- Commercial Terms Verified
- Image Group Check6 images from the same product-center record uploaded successfully
- Kenya Compliance Verified
- NotesSource variants and unresolved final-build items are disclosed on the page.
- Source Product Id48273
- Vehicle Type Match1