Water & Sanitation Trucks · Kenya water bowser and water-spraying truck range
50 t 6×6 Mine Water Truck for Dust Suppression
A source-checked mine water truck positioned for mine and quarry haul-road dust suppression. The page separates nominal capacity, chassis data and working-system details, while flagging right-hand drive, legal payload, engineering configuration and Kenya compliance items that still need confirmation before quotation.
Core capabilities in operation
Parameters are translated into practical working results. Any estimate depends on the listed operating conditions and is not a performance guarantee.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| Tank / water system | 50,000 L | Source-stated configuration; final build and legal fill volume must be confirmed | Tank material, mounted equipment, axle loads and registration limits affect usable payload. |
| Chassis layout | 6×6 | Source record | Confirm right-hand drive availability and final chassis code for Kenya. |
| Planning coverage example | About 25,000–50,000 m², or roughly 8,330–16,670 m of one 3 m-wide lane | Calculated from nominal source capacity at 1–2 L/m² application rate and 3 m treated width | Illustrative estimate only; actual output changes with nozzle setting, pump pressure, speed, terrain, overlap, wind and legal fill volume. |
Technical specifications
| Manufacturer | CLW (Chengli Special Automobile) |
|---|---|
| Chassis brand | CLW heavy-duty platform |
| Drive layout | 6×6 |
| Engine power | 353 kW |
| Fuel type | Diesel |
| Wheelbase | 3950 + 1350 mm |
| Capacity | 50,000 L |
Body and tank specifications
| Source Capacity Field | 50000 L |
|---|---|
| Source Tank Capacity | 50,000 L |
| Tank Material | Q355 high-strength steel |
| Tank Thickness | 8 mm |
Additional chassis specifications
| Curb Weight | 31000 kg |
|---|---|
| Drive Layout | 6×6 |
| Emission Options | Euro 2/3/4/5/6 |
| Engine / Motor | YC6K.480 |
| Fuel / Power | Diesel |
| Gvw | To be confirmed |
| Overall Dimensions | 9075 × 3450 × 4300 mm |
| Payload | 59000 kg |
| Power | 353 kW |
| Source Model | CLW Mine Field Water Truck |
| Transmission | 8DS240 8 Gears |
| Wheelbase | 3950 + 1350 mm |
Working system specifications
| Outlet | 5-inch gravity outlet plus 2.5-inch side outlet |
|---|---|
| Source-Listed Spray Width | ＞16m |
| Water Cannon | Iron water cannon |
| Water Handling | Self-priming and self-draining |
| Water Pump | BX-80QZB60/90S |
Operating performance
| Important Note | Performance values are source-stated and require final engineering confirmation for the ordered build. |
|---|---|
| Source Maximum Speed | 45 km/h |
| Source Spray Width | ＞16m |
Standard equipment
- Front counter jet
- Firefighting interface
- 5-inch gravity outlet
- Iron water cannon
- Self-priming and self-draining system
Optional equipment
- Duckbill spray
- Electronic cannon
- Electronic valve
- Rear spray
- Left/right side spray
Configuration options and trade-offs
- Tank capacity vs legal payload: Nominal tank volume may exceed the legally usable water load after body, equipment and axle limits are applied.
- Chassis and power options: Use the source options as a shortlist only; confirm the exact chassis, engine or motor and transmission for the order.
- Water system: Pump, cannon, spray bar and valve configuration must match the stated duty and water quality.
Operating fit
Suitable conditions
- Mine haul roads
- Quarry dust suppression
- Large industrial sites
Not recommended for
- Normal public-road use before route, dimension and axle approval
- Urban streets and restricted-access sites
- Potable-water delivery
Source-checked configuration, with final-build items clearly separated
50 t 6×6 Mine Water Truck for Dust Suppression is positioned for mine and quarry haul-road dust suppression. The source record lists 6×6 drive layout, 50,000 L capacity information and model CLW Mine Field Water Truck.
For a Kenya quotation, confirm right-hand drive availability, legal axle and payload limits, tank material, pump and spray layout, final dimensions and registration requirements. Nominal tank capacity is not a guarantee of the legally usable water load.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Category Match1
- Checked On2026-09-24
- Commercial Terms Verified
- Image Group Check6 images from the same product-center record uploaded successfully
- Kenya Compliance Verified
- NotesSource variants and unresolved final-build items are disclosed on the page.
- Source Product Id50304
- Vehicle Type Match1