Water & Sanitation Trucks · Kenya water bowser and water-spraying truck range
15 m³ Municipal Water Bowser with High-Pressure Gun
A source-checked municipal water bowser positioned for greening, irrigation and road spraying. The page separates nominal capacity, chassis data and working-system details, while flagging right-hand drive, legal payload, engineering configuration and Kenya compliance items that still need confirmation before quotation.
Core capabilities in operation
Parameters are translated into practical working results. Any estimate depends on the listed operating conditions and is not a performance guarantee.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| Tank / water system | 15 m³ nominal | Source-stated configuration; final build and legal fill volume must be confirmed | Tank material, mounted equipment, axle loads and registration limits affect usable payload. |
| Chassis layout | 4×2 | Source record | Confirm right-hand drive availability and final chassis code for Kenya. |
| Planning coverage example | About 7,500–15,000 m², or roughly 2,500–5,000 m of one 3 m-wide lane | Calculated from nominal source capacity at 1–2 L/m² application rate and 3 m treated width | Illustrative estimate only; actual output changes with nozzle setting, pump pressure, speed, terrain, overlap, wind and legal fill volume. |
Technical specifications
| Manufacturer | CLW (Chengli Special Automobile) |
|---|---|
| Chassis brand | CLW configurable chassis |
| Drive layout | 4×2 |
| Fuel type | Diesel |
| Wheelbase | 4700 mm |
| Gross vehicle weight | 18 000 kg |
| Capacity | 15 m³ nominal |
Body and tank specifications
| Source Capacity Field | 15 Cubic Meters (15m³) |
|---|---|
| Source Tank Capacity | 15 m³ nominal |
| Tank Material | 4 mm carbon steel |
| Tank Thickness | 4 mm |
Additional chassis specifications
| Curb Weight | 7000kg |
|---|---|
| Drive Layout | 4×2 |
| Emission Options | Euro 2/3/4/5/6 |
| Engine / Motor | Yuchai YCS06245-60/60A |
| Fuel / Power | Diesel |
| Gvw | 18,000 kg (18 Tons) |
| Overall Dimensions | 8420mm × 2550mm × 3300mm |
| Payload | 10,800 kg (10.8 Tons) |
| Power | 245 HP |
| Source Model | CLW-SAICW1 |
| Transmission | Fast 8-speed Gearbox with PTO & Remote Throttle |
| Wheelbase | 4700 mm |
Working system specifications
| Source-Listed Spray Width | ＞16m |
|---|---|
| Spray Arrangement | Front flush, rear spray and side spray |
| Water Cannon | Passenger-side high-pressure water cannon |
| Water Pump | 60-90 high-flow water pump |
Operating performance
| Important Note | Performance values are source-stated and require final engineering confirmation for the ordered build. |
|---|---|
| Source Maximum Speed | 110kg |
| Source Spray Width | ＞16m |
Standard equipment
- Front flush
- Rear spray
- Side spray
- High-pressure water cannon
- High-position sprinkler connection
- Anti-wave baffles
- 60-90 high-flow water pump
Configuration options and trade-offs
- Tank capacity vs legal payload: Nominal tank volume may exceed the legally usable water load after body, equipment and axle limits are applied.
- Chassis and power options: Use the source options as a shortlist only; confirm the exact chassis, engine or motor and transmission for the order.
- Water system: Pump, cannon, spray bar and valve configuration must match the stated duty and water quality.
Operating fit
Suitable conditions
- Municipal spraying
- Landscape irrigation
- Road washing with specified fittings
Not recommended for
- Potable-water delivery with the stated carbon-steel tank
- Full nominal fill where legal payload is lower than water mass
- Use without confirming pump and spray layout
Source-checked configuration, with final-build items clearly separated
15 m³ Municipal Water Bowser with High-Pressure Gun is positioned for greening, irrigation and road spraying. The source record lists 4×2 drive layout, 15 m³ nominal capacity information and model CLW-SAICW1.
For a Kenya quotation, confirm right-hand drive availability, legal axle and payload limits, tank material, pump and spray layout, final dimensions and registration requirements. Nominal tank capacity is not a guarantee of the legally usable water load.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Category Match1
- Checked On2026-09-24
- Commercial Terms Verified
- Image Group Check6 images from the same product-center record uploaded successfully
- Kenya Compliance Verified
- NotesSource variants and unresolved final-build items are disclosed on the page.
- Source Product Id48254
- Vehicle Type Match1