Fuel & Cold-Chain Trucks · Direct factory configuration
HOWO TX 20 m³ 6×4 Heavy-Duty Fuel Tanker Truck
A source-checked howo tx 20 m³ 6×4 heavy-duty fuel tanker truck for heavy-duty diesel and petroleum-product distribution. Source values and same-record images are presented separately from the Kenya engineering, payload, compliance and commercial items that still require confirmation before order.
Core capabilities in operation
Parameters are translated into practical working results. Any estimate depends on the listed operating conditions and is not a performance guarantee.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| Primary duty | Heavy-duty diesel and petroleum-product distribution | Use only with the final approved technical schedule | Route, payload, equipment and local rules affect performance. |
| Source capacity / rating | 20 m³ | Source-stated value | Final legal or usable capacity must be confirmed. |
Technical specifications
| Manufacturer | CLW (Chengli Special Automobile) |
|---|---|
| Chassis brand | HOWO |
| Drive layout | 6×4 |
| Fuel type | Diesel |
| Wheelbase | 4575+1400 mm |
| Gross vehicle weight | 26 000 kg |
| Capacity | 20 m³ |
Body and tank specifications
| Source Capacity | 20 m³ |
|---|---|
| Tank Material | Carbon Steel / Aluminum Alloy / Stainless Steel |
| Tank Thickness | 6 mm |
Additional chassis specifications
| Curb Weight | 12200 Kg |
|---|---|
| Drive Layout | 6×4 |
| Emission Listing | Euro 2/3/4/5/6 |
| Engine Model | Sinotruck HOWO MC09.35-60 350HP |
| Fuel / Power | Diesel |
| Gvw | 26000 Kg |
| Maximum Speed | 80 km/h |
| Overall Dimensions | 9840x2500x3280 mm |
| Payload / Load Rating | 21-30t |
| Source Model | HOWO TX Fuel Tank Truck |
| Transmission | HW13710C 10 Speeds |
| Wheelbase | 4575+1400 mm |
Working system specifications
| Bottom-Loading System | European Standard System |
|---|---|
| Pump / Dispenser | 80/60 Fuel Special Pump |
Operating performance
| Source Operating Note | Performance and capacity values require final engineering confirmation for the ordered build. |
|---|
Standard equipment
- Tank and chassis configuration shown in the source record
- Source image group from the same product record
Configuration options and trade-offs
- Capacity versus legal payload: Headline capacity or tonnage must be checked against body weight, equipment, axle loads and local registration limits.
- Chassis choice: Engine, emission level, transmission, steering position and wheelbase must match the destination and duty.
- Working equipment: Final performance depends on the selected system, controls, safety package and operating conditions.
Operating fit
Suitable conditions
- High-volume fuel distribution with a defined product and route
- Projects requiring a 6×4 heavy chassis
- Operations with confirmed loading and discharge interfaces
Not recommended for
- Urban access routes that cannot accommodate the final vehicle envelope
- Service without hazardous-goods approvals
- Loading above final axle or payload limits
Frequently asked questions
What information on this page has been checked?
The vehicle type, source category, 20 m³, available chassis parameters and six images were checked against product-center record 48882.
Is this exact configuration already approved for Kenya?
No. Right-hand drive availability, legal axle and payload limits, destination conformity, registration and duty-specific approvals must be confirmed for the final build.
What is needed for an accurate quotation?
Exact fuel or petroleum product and safety data; Target legal payload or nominal tank volume; Compartment plan; Loading, pump, meter, reel and hose requirements; Route, depot and discharge interfaces; Kenya RHD, registration and hazardous-goods requirements. The quotation should identify inclusions, exclusions and any values still awaiting confirmation.
Source-checked configuration for a defined duty
HOWO TX 20 m³ 6×4 Heavy-Duty Fuel Tanker Truck is positioned for heavy-duty diesel and petroleum-product distribution. The source record provides the vehicle type, 20 m³, chassis data and six images from the same product record.
For a Kenya quotation, confirm right-hand drive availability, final axle and payload limits, the complete working-system specification and destination registration requirements.
Configuration scope
The page separates source-stated parameters from order-specific items. Capacity or headline tonnage is not a guarantee of legal payload, refrigeration performance, lifting capacity at every radius or route suitability.
Kenya quotation checks
- Confirm final chassis code, steering position and engine/emission configuration.
- Confirm legal GVW, axle distribution and usable payload for the completed vehicle.
- Agree the working equipment, controls, safety devices and included documents.
- Review destination conformity and registration requirements before production release.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Category Match1
- Checked On2026-09-27
- Commercial Terms Verified
- Image Group Check6 images from the same product-center record; all URLs returned HTTP success before publication
- Kenya Compliance Verified
- NotesSource parameters are separated from final-build items.
- Source Product Id48882
- Vehicle Type Match1