Fuel & Cold-Chain Trucks · Direct factory configuration

FAW 20 t 8×4 Refrigerated Truck

A source-checked faw 20 t 8×4 refrigerated truck for high-capacity refrigerated cargo transport. Source values and same-record images are presented separately from the Kenya engineering, payload, compliance and commercial items that still require confirmation before order.

Core capabilities in operation

Parameters are translated into practical working results. Any estimate depends on the listed operating conditions and is not a performance guarantee.

ParameterWorking resultCalculation conditionsFactors that change the result
Primary dutyHigh-capacity refrigerated cargo transportUse only with the final approved technical scheduleRoute, payload, equipment and local rules affect performance.
Source capacity / rating20 t source ratingSource-stated valueFinal legal or usable capacity must be confirmed.

Technical specifications

ManufacturerCLW (Chengli Special Automobile)
Chassis brandFAW
Drive layout4X2 4X4 6X2 6X4 6X6 8X4
Fuel typeDiesel
Wheelbase5100,4700,5300,5800,6000,4500 (mm)
Gross vehicle weight18 000 kg
Capacity20 t source rating

Body and tank specifications

Insulated Body ConstructionCargo compartment floor thickness 80 mm; side panel thickness 80mm
Insulated Box Dimensions6830,7800,6200×2420×2520,2600 (mm)
Source Capacity / Rating20 t source rating
Source Payload9990 (kg)

Additional chassis specifications

Curb Weight14100 (Kg)
Drive Layout4X2 4X4 6X2 6X4 6X6 8X4
Emission ListingEuro 2/3/4/5/6
Engine ModelSINOTRUCK MC07H.35-61
Fuel / PowerDiesel
Gvw18000 (Kg)
Maximum Speed102 (km/h)
Overall Dimensions12000×2600×3980 (mm)
Payload / Load Rating9990 (kg)
Source ModelZZ5187XLCN511KF1
TransmissionAutomatic
Wheelbase5100,4700,5300,5800,6000,4500 (mm)

Working system specifications

Refrigeration UnitBrand, capacity and set-point range are not confirmed unless shown in the final technical schedule
Temperature MonitoringTo be specified by buyer

Operating performance

Source Operating NotePerformance and capacity values require final engineering confirmation for the ordered build.

Standard equipment

  • Insulated cargo body shown in the source record
  • Source image group from the same product record

Configuration options and trade-offs

  • Capacity versus legal payload: Headline capacity or tonnage must be checked against body weight, equipment, axle loads and local registration limits.
  • Chassis choice: Engine, emission level, transmission, steering position and wheelbase must match the destination and duty.
  • Working equipment: Final performance depends on the selected system, controls, safety package and operating conditions.

Operating fit

Suitable conditions

  • High-volume routes with suitable access and unloading facilities
  • Cargo with a confirmed temperature profile
  • Operations within final axle and gross-weight limits

Not recommended for

  • Tight urban routes not checked for turning and clearance
  • Unspecified refrigeration capacity or insulation
  • Treating source tonnage as guaranteed legal payload

Frequently asked questions

What information on this page has been checked?

The vehicle type, source category, 20 t source rating, available chassis parameters and six images were checked against product-center record 49197.

Is this exact configuration already approved for Kenya?

No. Right-hand drive availability, legal axle and payload limits, destination conformity, registration and duty-specific approvals must be confirmed for the final build.

What is needed for an accurate quotation?

Cargo type and required set point; Loading temperature and pull-down requirement; Route duration, stops and door-opening pattern; Internal dimensions or pallet count; Refrigeration unit and standby-power preference; Temperature monitoring and validation needs. The quotation should identify inclusions, exclusions and any values still awaiting confirmation.

Source-checked configuration for a defined duty

FAW 20 t 8×4 Refrigerated Truck is positioned for high-capacity refrigerated cargo transport. The source record provides the vehicle type, 20 t source rating, chassis data and six images from the same product record.

For a Kenya quotation, confirm right-hand drive availability, final axle and payload limits, the complete working-system specification and destination registration requirements.

Configuration scope

The page separates source-stated parameters from order-specific items. Capacity or headline tonnage is not a guarantee of legal payload, refrigeration performance, lifting capacity at every radius or route suitability.

Kenya quotation checks

  • Confirm final chassis code, steering position and engine/emission configuration.
  • Confirm legal GVW, axle distribution and usable payload for the completed vehicle.
  • Agree the working equipment, controls, safety devices and included documents.
  • Review destination conformity and registration requirements before production release.

Verification and support

Order-specific confirmation required

Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.

  • Category Match1
  • Checked On2026-09-27
  • Commercial Terms Verified
  • Image Group Check6 images from the same product-center record; all URLs returned HTTP success before publication
  • Kenya Compliance Verified
  • NotesSource parameters are separated from final-build items.
  • Source Product Id49197
  • Vehicle Type Match1