Fuel & Cold-Chain Trucks · Direct factory configuration
Dongfeng 2.6 m³ 4×2 Aluminium Fuel Delivery Truck
A source-checked dongfeng 2.6 m³ 4×2 aluminium fuel delivery truck for mobile diesel delivery for farms, fleets and work sites. Source values and same-record images are presented separately from the Kenya engineering, payload, compliance and commercial items that still require confirmation before order.
Core capabilities in operation
Parameters are translated into practical working results. Any estimate depends on the listed operating conditions and is not a performance guarantee.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| Primary duty | Mobile diesel delivery for farms, fleets and work sites | Use only with the final approved technical schedule | Route, payload, equipment and local rules affect performance. |
| Source capacity / rating | 2,760 L nominal / 2,630 L effective | Source-stated value | Final legal or usable capacity must be confirmed. |
Technical specifications
| Manufacturer | CLW (Chengli Special Automobile) |
|---|---|
| Chassis brand | Dongfeng Dongfeng EQ1040GL6DJ1 Class II Chassis |
| Drive layout | 4×2 |
| Fuel type | Diesel |
| Wheelbase | 2750 mm |
| Gross vehicle weight | 4 495 kg |
| Capacity | 2,760 L nominal / 2,630 L effective |
Body and tank specifications
| Source Capacity | 2,760 L nominal / 2,630 L effective |
|---|---|
| Tank Material | Aluminum Alloy 5182 |
Additional chassis specifications
| Chassis Model | Dongfeng EQ1040GL6DJ1 Class II Chassis |
|---|---|
| Curb Weight | 2520 kg |
| Drive Layout | 4×2 |
| Emission Listing | Euro 2 / 3 / 4 / 5 / 6 |
| Engine Model | Qanchai Q23A-142E60 |
| Fuel / Power | Diesel |
| Gvw | 4495 kg |
| Overall Dimensions | 5430 × 2000 × 2500 mm |
| Payload / Load Rating | 1845 kg |
| Source Model | CL5041GJY6BWN |
| Transmission | Manual |
| Wheelbase | 2750 mm |
Working system specifications
| Hose | Yes |
|---|
Operating performance
| Source Operating Note | Performance and capacity values require final engineering confirmation for the ordered build. |
|---|
Standard equipment
- Tank and chassis configuration shown in the source record
- Source image group from the same product record
Configuration options and trade-offs
- Capacity versus legal payload: Headline capacity or tonnage must be checked against body weight, equipment, axle loads and local registration limits.
- Chassis choice: Engine, emission level, transmission, steering position and wheelbase must match the destination and duty.
- Working equipment: Final performance depends on the selected system, controls, safety package and operating conditions.
Operating fit
Suitable conditions
- Short-route fuel delivery with an approved operating plan
- Sites needing metered mobile refuelling
- Operations matched to the final registered payload
Not recommended for
- Use without hazardous-goods approvals and trained operators
- Cargo not confirmed compatible with the tank, seals and pipework
- Operation above final axle or payload limits
Frequently asked questions
What information on this page has been checked?
The vehicle type, source category, 2,760 l nominal / 2,630 l effective, available chassis parameters and six images were checked against product-center record 48870.
Is this exact configuration already approved for Kenya?
No. Right-hand drive availability, legal axle and payload limits, destination conformity, registration and duty-specific approvals must be confirmed for the final build.
What is needed for an accurate quotation?
Exact fuel or petroleum product and safety data; Target legal payload or nominal tank volume; Compartment plan; Loading, pump, meter, reel and hose requirements; Route, depot and discharge interfaces; Kenya RHD, registration and hazardous-goods requirements. The quotation should identify inclusions, exclusions and any values still awaiting confirmation.
Source-checked configuration for a defined duty
Dongfeng 2.6 m³ 4×2 Aluminium Fuel Delivery Truck is positioned for mobile diesel delivery for farms, fleets and work sites. The source record provides the vehicle type, 2,760 l nominal / 2,630 l effective, chassis data and six images from the same product record.
The source record lists 2,760 L total tank capacity and 2,630 L effective volume; its generic tank-volume band conflicts with these exact fields, so the exact fields are used. For a Kenya quotation, confirm right-hand drive availability, final axle and payload limits, the complete working-system specification and destination registration requirements.
Configuration scope
The page separates source-stated parameters from order-specific items. Capacity or headline tonnage is not a guarantee of legal payload, refrigeration performance, lifting capacity at every radius or route suitability.
Kenya quotation checks
- Confirm final chassis code, steering position and engine/emission configuration.
- Confirm legal GVW, axle distribution and usable payload for the completed vehicle.
- Agree the working equipment, controls, safety devices and included documents.
- Review destination conformity and registration requirements before production release.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Category Match1
- Checked On2026-09-27
- Commercial Terms Verified
- Image Group Check6 images from the same product-center record; all URLs returned HTTP success before publication
- Kenya Compliance Verified
- NotesThe source record lists 2,760 L total tank capacity and 2,630 L effective volume; its generic tank-volume band conflicts with these exact fields, so the exact fields are used.
- Source Product Id48870
- Vehicle Type Match1