Construction & Haulage Trucks · Direct factory configuration
HOWO TX 430 HP 8×4 6.8 m Heavy Tipper Truck
A source-checked howo tx 430 hp 8×4 6.8 m heavy tipper truck for high-capacity construction and bulk-material haulage. Source values and same-record images are presented separately from the Kenya engineering, payload, compliance and commercial items that still require confirmation before order.
Core capabilities in operation
Parameters are translated into practical working results. Any estimate depends on the listed operating conditions and is not a performance guarantee.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| Primary duty | High-capacity construction and bulk-material haulage | Use only with the final approved technical schedule | Route, payload, equipment and local rules affect performance. |
| Source capacity / rating | 6.8 m source body length | Source-stated value | Final legal or usable capacity must be confirmed. |
Technical specifications
| Manufacturer | CLW (Chengli Special Automobile) |
|---|---|
| Chassis brand | HOWO |
| Drive layout | 8×4 |
| Fuel type | Diesel |
| Wheelbase | 1800 + 4800 + 1400 mm |
| Gross vehicle weight | 50 000 kg |
| Capacity | 6.8 m source body length |
Body and tank specifications
| Source Load Rating | 6.8 m source body length |
|---|
Additional chassis specifications
| Curb Weight | 20000 kg |
|---|---|
| Drive Layout | 8×4 |
| Emission Listing | Euro 2/3/4/5/6 |
| Fuel / Power | Diesel |
| Gvw | ≥ 50000 kg |
| Overall Dimensions | 11995 x 2500 x 3470 mm |
| Payload / Load Rating | ≥ 30000 kg |
| Transmission | Manual |
| Wheelbase | 1800 + 4800 + 1400 mm |
Working system specifications
| Tipping Type | Front Lifting Style |
|---|
Operating performance
| Source Operating Note | Performance and capacity values require final engineering confirmation for the ordered build. |
|---|
Standard equipment
- Hydraulic tipping system shown in the source record
- Source image group from the same product record
Configuration options and trade-offs
- Capacity versus legal payload: Headline capacity or tonnage must be checked against body weight, equipment, axle loads and local registration limits.
- Chassis choice: Engine, emission level, transmission, steering position and wheelbase must match the destination and duty.
- Working equipment: Final performance depends on the selected system, controls, safety package and operating conditions.
Operating fit
Suitable conditions
- High-throughput routes suitable for an 8×4 vehicle
- Known material density and loader size
- Operations with verified gross and axle weights
Not recommended for
- Tight sites not checked for turning and clearance
- Filling the body by volume without density calculations
- Tipping beneath overhead obstructions
Frequently asked questions
What information on this page has been checked?
The vehicle type, source category, 6.8 m source body length, available chassis parameters and six images were checked against product-center record 50719.
Is this exact configuration already approved for Kenya?
No. Right-hand drive availability, legal axle and payload limits, destination conformity, registration and duty-specific approvals must be confirmed for the final build.
What is needed for an accurate quotation?
Material and bulk density; Target legal payload or GVW; Haul distance, surface and maximum gradient; Loader bucket size and loading method; Required body dimensions, steel grade and thickness; Tipping area and overhead clearance. The quotation should identify inclusions, exclusions and any values still awaiting confirmation.
Source-checked configuration for a defined duty
HOWO TX 430 HP 8×4 6.8 m Heavy Tipper Truck is positioned for high-capacity construction and bulk-material haulage. The source record provides the vehicle type, 6.8 m source body length, chassis data and six images from the same product record.
For a Kenya quotation, confirm right-hand drive availability, final axle and payload limits, the complete working-system specification and destination registration requirements.
Configuration scope
The page separates source-stated parameters from order-specific items. Capacity or headline tonnage is not a guarantee of legal payload, refrigeration performance, lifting capacity at every radius or route suitability.
Kenya quotation checks
- Confirm final chassis code, steering position and engine/emission configuration.
- Confirm legal GVW, axle distribution and usable payload for the completed vehicle.
- Agree the working equipment, controls, safety devices and included documents.
- Review destination conformity and registration requirements before production release.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Category Match1
- Checked On2026-09-27
- Commercial Terms Verified
- Image Group Check6 images from the same product-center record; all URLs returned HTTP success before publication
- Kenya Compliance Verified
- NotesSource parameters are separated from final-build items.
- Source Product Id50719
- Vehicle Type Match1