Construction & Haulage Trucks · Direct factory configuration
12 t 6×4 Straight-Boom Truck-Mounted Crane
A source-checked 12 t 6×4 straight-boom truck-mounted crane for heavy construction lifting with transport deck. Source values and same-record images are presented separately from the Kenya engineering, payload, compliance and commercial items that still require confirmation before order.
Core capabilities in operation
Parameters are translated into practical working results. Any estimate depends on the listed operating conditions and is not a performance guarantee.
| Parameter | Working result | Calculation conditions | Factors that change the result |
|---|---|---|---|
| Primary duty | Heavy construction lifting with transport deck | Use only with the final approved technical schedule | Route, payload, equipment and local rules affect performance. |
| Source capacity / rating | 12 t source crane class | Source-stated value | Final legal or usable capacity must be confirmed. |
Technical specifications
| Manufacturer | CLW (Chengli Special Automobile) |
|---|---|
| Chassis brand | CLW Dongfeng |
| Drive layout | To be confirmed |
| Engine power | 200 kW |
| Fuel type | Diesel |
| Wheelbase | 5850 + 1350 mm |
| Gross vehicle weight | 25 000 kg |
| Capacity | 12 t source crane class |
Body and tank specifications
| Cargo Body Dimensions | 8500 × 2450 × 600 mm (Customized) |
|---|---|
| Cargo Body Material | Q235 |
| Source Crane Class | 12 t source crane class |
Additional chassis specifications
| Chassis Model | Dongfeng |
|---|---|
| Curb Weight | 17000 kg |
| Drive Layout | To be confirmed |
| Emission Listing | Euro 2/3/4/5/6 |
| Engine Model | YCS06270-60 |
| Engine Power | 200 kW |
| Fuel / Power | Diesel |
| Gvw | 25000 kg |
| Overall Dimensions | 12000 x 2550 x 3800 mm |
| Payload / Load Rating | 7870 kg |
| Source Model | CLW 6x4 12 Tons Boom Truck |
| Transmission | 10 Gears |
| Wheelbase | 5850 + 1350 mm |
Working system specifications
| Crane Model | SQS300-5 |
|---|---|
| Crane Type | Five-Section Octagon-Shaped Straight Boom |
| Maximum Lifting Height | 22 M |
Operating performance
| Source Operating Note | Performance and capacity values require final engineering confirmation for the ordered build. |
|---|
Standard equipment
- Truck-mounted crane and subframe shown in the source record
- Source image group from the same product record
Configuration options and trade-offs
- Capacity versus legal payload: Headline capacity or tonnage must be checked against body weight, equipment, axle loads and local registration limits.
- Chassis choice: Engine, emission level, transmission, steering position and wheelbase must match the destination and duty.
- Working equipment: Final performance depends on the selected system, controls, safety package and operating conditions.
Operating fit
Suitable conditions
- Loads with a confirmed load chart and working radius
- Sites with firm level stabiliser areas
- Routes matched to the 6×4 chassis
Not recommended for
- Unplanned tandem or critical lifts
- Personnel lifting without certified equipment
- Operations above final axle or gross-weight limits
Frequently asked questions
What information on this page has been checked?
The vehicle type, source category, 12 t source crane class, available chassis parameters and six images were checked against product-center record 50666.
Is this exact configuration already approved for Kenya?
No. Right-hand drive availability, legal axle and payload limits, destination conformity, registration and duty-specific approvals must be confirmed for the final build.
What is needed for an accurate quotation?
Maximum load, working radius and lift height; Lift frequency and duty cycle; Cargo deck and remaining payload requirement; Site access and outrigger ground condition; Required boom type, controls and attachments; Kenya registration and local lifting requirements. The quotation should identify inclusions, exclusions and any values still awaiting confirmation.
Source-checked configuration for a defined duty
12 t 6×4 Straight-Boom Truck-Mounted Crane is positioned for heavy construction lifting with transport deck. The source record provides the vehicle type, 12 t source crane class, chassis data and six images from the same product record.
For a Kenya quotation, confirm right-hand drive availability, final axle and payload limits, the complete working-system specification and destination registration requirements.
Configuration scope
The page separates source-stated parameters from order-specific items. Capacity or headline tonnage is not a guarantee of legal payload, refrigeration performance, lifting capacity at every radius or route suitability.
Kenya quotation checks
- Confirm final chassis code, steering position and engine/emission configuration.
- Confirm legal GVW, axle distribution and usable payload for the completed vehicle.
- Agree the working equipment, controls, safety devices and included documents.
- Review destination conformity and registration requirements before production release.
Verification and support
Vehicle data is mapped from the source product record. Final payload, steering side, emissions, selected equipment, documents and destination-market compliance must be confirmed in the signed technical schedule.
- Category Match1
- Checked On2026-09-27
- Commercial Terms Verified
- Image Group Check6 images from the same product-center record; all URLs returned HTTP success before publication
- Kenya Compliance Verified
- NotesSource parameters are separated from final-build items.
- Source Product Id50666
- Vehicle Type Match1